User's Manual

12
3
FREQUENCY AND CHANNEL SETTING
3
N Selecting a memory channel
qPush [V/M] to select the memory mode.
• “ ” appears when the memory mode is selected.
wRotate [DIAL] to select a desired memory channel.
• Only programmed memory channels can be selected.
• While holding down [FUNC], rotate [DIAL] to select a memory
channel in 10 channels steps.
[DIAL]
[DIAL] changes the
memory channel.
N Lock function
To prevent accidental frequency changes and unnecessary
function access, use the lock function.
± While holding down [FUNC], push and hold
[ ](BAND)
for 1 second to turn the lock function ON or OFF.
• “ ” appears while the lock function is activated.
• [SQL] and [S]/[T] can be used while the lock function is in use
with default setting. Either or both [SQL] and [S]/[T] keys can
also be locked in the Set mode. (p. 43)
“ ” appears while the
lock function is in use.