User's Manual

46
9
SET MODE
9
D Display backlighting
The receiver has a backlit display with a 5 seconds timer, for
dim light operation. The backlighting can be turned ON con-
tinuously or turned OFF, if desired.
• OFF : Never lights.
• ON :
Lights continuously while receiver power is ON.
• AUTO1 : Lights when an operation is performed, goes
out after 5 seconds. (default)
• AUTO2 : Lights when an operation is performed, goes out
after 5 seconds. However, while operating with an
external DC power source, the backlight stays ON.
D Power save
The power save function reduces the current drain to con-
serve battery power. This power save function can be turned
OFF, if desired.
In the default setting (“ON”), the power save function is acti-
vated in 1:4
(125 msec.: 500 msec.) ratio when no signal is
received for 5 seconds. The ratio becomes 1:8
(125 msec.: 1
sec.)
when no signal is received for another 60 seconds.
D Antenna selection
This item appears only when accessing the Set mode
in the AM or FM broadcast band mode (frequencies
may differ, depending on the receiver version.
)
Independently select the antenna to use for AM or FM
broadcast band reception.
• EXT : Uses the antenna connected to the antenna con-
nector. (default)
• BAR : Uses the internal bar antenna for the AM broad-
cast band reception. (This selection appears
only when accessing the Set mode in the AM
broadcast band mode.)
• EAR : Uses the connected earphone’s wire as the
antenna for FM broadcast band reception. (This
selection appears only when accessing the Set
mode in the FM broadcast band mode.)