User's Manual
q
w
iR6
VFO and memory mode selection
POCKET GUIDE
Push [V/M] to toggle between the
VFO and the memory mode.
Receive mode selection
Push [MODE] repeatedly to
select the desired mode
Audio level setting
Push [Y] to increase, push [Z]
to decrease the audio level.
Squelch level setting
Hold down [SQL], rotate [DIAL]
to set the squelch level.
Frequency band selection
Push [BAND] repeatedly, or hold
down [BAND], rotate [DIAL] to
select the desired frequency band.
Tuning step selection
Push [TS], then rotate [DIAL] to
select the desired tuning step.
• Push [TS] again to return to the
previous screen.
Key lock function
Hold down [FUNC], push [ ]
(BAND) for 1 sec. to toggle the
key lock function ON or OFF.
• “ ” appears when the lock function
is in use.
Frequency setting
Push [V/M] to select the VFO
mode.
Rotate [DIAL] to set the desired
operating frequency.
q
w
Memory channel selection
Push [V/M] to select the
memory mode.
Rotate [DIAL] to set a desired
memory channel.
• Hold down [FUNC], rotate [DIAL]
changes memory channel in 10
channel steps.
q
w
e
Memory bank channel selection
Push [V/M] to select the
memory mode.
Push [BAND] repeatedly, or
while holding down [BAND],
rotate [DIAL] selects a desired
bank.
Rotate [DIAL] to select the
desired bank channel.
Attenuator function
Hold down [FUNC], push [ ]
(SQL) to toggle the attenuator
ON or OFF.
• “ATT” appears when the attenua-
tor function is in use.
72
15
POCKET GUIDE
Important operating instructions are summed up on this and the following
page for your simple reference.
By cutting along the line and folding on the dotted line, it will become a
card sized operating guide which can easily be carried in a card case or
wallet, etc.
q Cut w Fold
e Complete
<CUT HERE>