User's Manual

30
5
MAKING A GATEWAY CALL
New2001
5
MAKING A GATEWAY CALL
New2001
STEP 2
Set “TO” (Destination)
Push D-pad( q ) to select “TO,”
and then push D-pad(Ent).
Push D-pad( w ) to select
“Gateway CQ,” and then push
D-pad(Ent).
D-pad
(�)
(Ent)
STEP 3
Hold down [PTT] to transmit
Whileholdingdown[PTT],speak
at your normal voice level.
•“/”isautomaticallyinsertedtoshow
it is a repeater call sign.
Transmitting
Push D-pad( e ) to select the
repeater group where your
destination repeater is listed,
and then push D-pad(Ent).
•Example:“11:Japan”
Push D-pad( r ) to select the
destination repeater, and
then push D-pad(Ent).
•Example:“Hamacho430”
JA3YUA, this is JM1ZLK.
Hello, how are you?
JM1ZLK
JA3YUA
JA3YUA calling to
JP1YIU port A.
JA3YUA
JM1ZLK, this is JA3YUA.
Thanks for the nice QSO and I
hope to talk to you again soon.
This is JA3YUA now clear of
the JP3YHH repeater.
•
•
•
Convenient! ✓
The Gateway CQ call is used to call any repeater, but you can
call a specific station by simply saying their call sign.
< Communication example
for a Gateway call>