User's Manual

2001 NEW
43
5
MENU SCREEN
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Quick Reference
Setup D
You can make a new entries that are Channel, Net-
work, ALE Self ID or Selcall Profile using the Setup
Wizard.
/
Push q [MNGR](#) to enter the Manager Menu
screen.
• “Admin Logout” is automatically selected.
Push w [r] or [s] to select “Setup,” and then push
[4].
Create the desired entry as follows. e
• “Channel,” “Network,” “ALE Self ID,” or “Selcall Profile”
can be selected.
•Channel
A new memory channel can be created.
Push q [r] or [s] to select “Channel,” and then hold
down [4] for 1 second to enter the input mode.
Push Keypad to enter the Channel name, and then w
push [4].
• Up to 20 characters can be entered.
• See page 2 for the usable characters details.
• Push [A/a](#) to toggle between the Upper, Lower case
letter input modes and Number input mode.
• Push [8] to delete the character, symbol or number to
the left of the cursor.
• Push [t](§) or [u](§§§) to move the cursor.
Push Keypad to enter the receive frequency, and e
then push [4].
• Push [M] to enter the decimal point.
• Push [8] to delete the number.
• Push [t](§) or [u](§§§) to move the cursor.
Push Keypad to enter the transmit frequency, and r
then push [4].
• Push [M] to enter the decimal point.
• Push [8] to delete the number.
• Push [t](§) or [u](§§§) to move the cursor.
Push t [r] or [s] to select the operating mode.
Push y [4] to save the channel and exit.