User's Manual

PANEL DESCRIPTION

Function display N

q BUSY/TRANSMIT ICON (p. 11)

“ ±

” appears when receiving a signal or when the

squelch is open.

“ ±

” appears while transmitting.

w POWER ICON (p. 11)

“25W” appears when high power is selected. ±

“1W” appears when low power is selected. ±

e RX SPEAKER ICON (p. 75)

Appears while in the RX Speaker mode.

r CHANNEL GROUP ICON (p. 10)

A selected channel group icon, U.S.A. “USA,” Interna- ±

tional “INT” or Canadian “CAN” appears, depending on

the transceiver version.

“WX” appears when the weather channel is selected. ±

t CALL CHANNEL ICON (p. 9)

Appears when the Call channel is selected.

y DUPLEX ICON (p. 10)

Appears when a duplex channel is selected.

u FAVORITE CHANNEL ICON (p. 18)

Appears when a Favorite (Tag) channel is selected.

i MESSAGE ICON

Blinks when there is an unread DSC message.

o GPS ICON

Stays ON when the GPS receiver is activated and valid ±

position data is received.

Blinks when invalid position data is being received. ±

!0 SWITCH ICON (p. 69)

Appears when the “CH 16 SWITCH” in DSC Settings is set

to ‘OFF.’

!1 LOW BATTERY ICON

Blinks when the battery voltage drops to approximately

13 V DC or less.