User's Manual

7
2
PANEL DESCRIPTION
Speaker Microphone N
Microphone
Speaker
w
q
e
r
q PTT SWITCH [PTT]
Hold down to transmit, release to receive. (pp. 11, 12)
w CHANNEL UP/DOWN KEYS [Y]/[Z]
Push either key to check favorite channels, change scan-
ning direction or manually resumes a scan. (pp. 11, 18)
e TRANSMIT POWER KEY [HI/LO]
± Push to toggle the power high or low. (p. 11)
  s3OMECHANNELSARESETTOONLYLOWPOWER
± While holding down [HI/LO], turn ON the power to turn
the Microphone Lock function ON or OFF. (p. 14)
r CHANNEL 16/CALL CHANNEL KEY [16/C]
± Push to select Channel 16. (p. 9)
± Hold down for 1 second to select the Call channel. (p. 9 )
  sh#!,,vAPPEARSWHENTHE#ALLCHANNELISSELECTED
Soft key function N
Various functions can be assigned to the soft keys. When a
key function is assigned, the key icon is displayed above the
soft key, as shown below. Consult your Icom dealer for de-
tails concerning which functions are pre-programmed into the
keys.
Soft keys are also used for select the icon in the menu screen.
(p. 91)
Soft key function selection D
When “ ± Ω” or “≈” is displayed beside the key icon, pushing
[Ω] or [≈] sequentially shows the previous or next group of
key functions that is assigned to the soft key.
Push Push
*
*Push this key to start
and stop scan.
The order of the key icons may differ, depending on the
preprogramming.