User's Manual

20
7
DSC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
D Programming Group ID
Enter “GROUP ID” in the DSC SETTINGS menu. q
Push [ADD]. w
 s4HEh'2/50)$vPROGRAMSCREENISDISPLAYED
e Enter a desired group ID in the following way:
 s3ELECTADESIREDNUMBERUSING;Y]/[Z]/[Ω]/[≈].
 s0USH;%.4=TOSETIT
s4OMOVETHECURSORROTATEDIALORSELECTEITHERARROWh←” or “→,”
then push [ENT].
The first digit is fixed as ‘0’ for a Group ID.
The first two digits are ‘0’ for any Coast station ID.
r Repeat step e to input the specific 9 digits group code.
t After entering the 9 digit code, push [ENT] or Dial to set it.
 s4HE'ROUP)$NAMEPROGRAMMINGSCREENISDISPLAYED
Enter a desired 10 digit ID name in the following way: y
 s3ELECTADESIREDCHARACTERUSING;Y]/[Z]/[Ω]/[≈].
 s0USH;%.4=TOSETIT
s4OMOVETHECURSORROTATEDIALORselect either arrow, “←” or “→,”
then push [ENT].
 s0USH;=THEN;=THEN;!"#=TOSELECTACHARACTERGROUP
After entering the ID name, select “FINISH” using dial or u
[Y]/[Z]/[Ω]/[≈], then push [ENT] or Dial to program it.
 s4HEh'2/50)$vLISTSCREENISDISPLAYED
i Push [MENU] to exit the MENU screen.
eMENUf ¶ eDSC SETf ¶ e Group ID f
(Push [MENU]) (Select icon) (Rotate Dial, then push [ENT].)