User's Manual

22
7
DSC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
A Distress call should include the ship’s position and time.
If no GPS is connected, your position and UTC (Universal
Time Coordinated) time should be manually input. They are
automatically included when a GPS receiver compatible with
the NMEA0183 ver. 2.0 or 3.01 or NMEA 2000 format is con-
nected.
s-ANUALPROGRAMMINGISDISABLEDWHENA'03RECEIVERIS
connected.
s-ANUALLYPROGRAMMEDPOSITIONANDTIMEWILLBEHELDFOR
only 23.5 hours.
q Enter “POSITION INPUT” in the DSC SETTINGS menu.
Edit your latitude and longitude position using Dial, or [ w Y]/
[Z]/[Ω]/[≈].
 s3ELECTADESIREDNUMBERUSING;Y]/[Z]/[Ω]/[≈].
 s0USH;%.4=TOSETIT
s4OMOVETHECURSORROTATEDIALORSELECTEITHERARROWh←” or “→,”
then push [ENT].
 s3ELECT..ORTHLATITUDEOR33OUTHLATITUDEWHENTHECURSORIS
on the ‘N’ or ‘S’ position.
 s3ELECT77ESTLONGITUDEOR%%ASTLONGITUDEWHENTHECURSOR
is on the ‘W’ or ‘E’ position.
After entering the position, push [ENT] to program it. e
The UTC time programming screen is displayed, enter the r
UTC time in the following way:
 s3ELECTADESIREDNUMBERUSING;Y]/[Z]/[Ω]/[≈].
 s0USH;%.4=TOSETIT
s4OMOVETHECURSORROTATEDIALORSELECTEITHERARROWh←” or “→,”
then push [ENT].
Push [ENT] or Dial to program your position and time. t
 s2ETURNTOTHEh$3#3%44).'3vSCREEN
Position and time programming N
eMENUf ¶ eDSC SETf ¶ ePosition Inputf
(Push [MENU]) (Select icon) (Rotate Dial, then push [ENT].)