User's Manual

28
7
CHAPTER CONTINUED
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Transmitting DSC calls N
To ensure correct operation of the DSC function, make
sure you correctly set the CH70 SQL Level. (p. 71)
Transmitting an individual call D
The Individual call function allows you to transmit a DSC sig-
nal to only a specific station.
Enter “INDIVIDUAL CALL” in the DSC CALLS menu. q
eMENUf ¶ eDSCf ¶ eIndividual Callf
(Push [MENU]) (Select icon) (Rotate Dial, then push [ENT].)
Select the desired pre-programmed individual address, or w
“Manual Input,” using Dial or [Y]/[Z], then push [ENT].
 s4HE)$CODEFORTHE)NDIVIDUALCALLCANBESETlRSTP
s7HENh-ANUAL)NPUTvISSELECTEDSETADESIREDDIGIT--3))$
code for the individual you wish to call.
About Manual Inputting:
Enter a desired individual ID in the following way:
s3ELECTADESIREDNUMBERUSING;Y]/[Z]/[Ω]/[≈].
s0USH;%.4=TOSETIT
s4OMOVETHECURSORROTATEDIALORselect either arrow, “←” or “→,”
then push [ENT].
s4HElRSTDIGITISSPECIlEDAS@FORA'ROUP)$)FA'ROUP)$IS
entered, an error beep sounds after pushing [FINISH].
s4HElRSTTWODIGITSARE@FORANYCOASTSTATION)$
./4% When a coast station is selected in step w, the
voice channel is automatically specified by the coast sta-
tion. Therefore, skip step r and go directly to step t.