User's Manual

33
7
DSC OPERATION
Transmitting a Group call D
The Group call function allows you to transmit a DSC signal
to only a specific group.
Enter “GROUP CALL” in the DSC CALLS menu. q
eMENUf ¶ eDSCf ¶ eGroup Callf
(Push [MENU]) (Select icon) (Rotate Dial, then push [ENT].)
Select the desired pre-programmed group address or w
“Manual Input,” using Dial or [Y]/[Z], then push [ENT].
 s4HE)$CODEFORTHE'ROUPCALLCANBESETlRSTP
s7HENh-ANUAL)NPUTvISSELECTEDSETTHEDIGIT)$CODEFORTHE
group you wish to call.
e Select a desired intership channel using Dial or [Y](CH)/
[Z](CH), then push [ENT].
 s)NTERSHIPCHANNELSAREALREADYPRESETINTOTHETRANSCEIVERINTHE
recommended order.
About Manual Inputting:
Enter a desired group ID in the following way:
s3ELECTADESIREDNUMBERUSING;Y]/[Z]/[Ω]/[≈].
s0USH;%.4=OR$IALTOSETIT
s4OMOVETHECURSORROTATEDIALORselect either arrow, “←” or “→,”
then push [ENT].
s4HElRSTDIGITISSPECIlEDAS@FORA'ROUP)$
s4HElRSTTWODIGITSARE@FORANY#OASTSTATION)$