User's Manual

43
7
DSC OPERATION
D Transmitting a Test call
Testing on the exclusive DSC distress and safety calling chan-
nels should be avoided as much as possible. When testing on
a distress/safety channel is unavoidable, you should indicate
that these are test transmissions.
Normally the test call would require no further communica-
tions between the two stations involved.
Enter “TEST CALL” in the DSC CALLS menu. q
eMENUf ¶ eDSCf ¶ eTest Callf
(Push [MENU]) (Select icon) (Rotate Dial, then push [ENT].)
Select a desired pre-programmed individual address, or w
“Manual Input,” then push Dial or [ENT].
 s4HE)$CODEFORTHE)NDIVIDUALCALLCANBESETlRSTP
s7HENh-ANUAL)NPUTvISSELECTEDSETTHEDIGIT--3))$CODEFOR
the individual you wish to call.
About Manual Inputting:
Enter a desired address ID in the following way:
s3ELECTADESIREDNUMBERUSING$IALOR;Y]/[Z]/[Ω]/[≈].
s0USH;%.4=OR$IALTOSETIT
s4OMOVETHECURSORSELECTEITHERARROWh←” or “→,” then push
[ENT] or Dial.
s4HElRSTDIGITISSPECIlEDAS@FORA'ROUP)$)FA'ROUP)$IS
entered, an error beep sounds after pushing [FINISH].
s4HElRSTTWODIGITSARE@FORANY#OASTSTATION)$
e A confirmation screen appears.
 s#ONlRMTHECALLCONTENTS