User's Manual

55
7
DSC OPERATION
Receiving D a Distress Relay Call
When a Distress Relay call is received:
The emergency alarm sounds for 2 minutes. ±
“ RCVD DISTRESS RELAY” pops up and the LCD back- ±
light blinks.
Push [ALARM OFF] to stop the alarm and the blinking q
backlight.
Push a soft key to select your desired action. w
[IGN]
±Push to return to the normal operating mode.
  s4HETRANSCEIVEREXITSTHE$3#MODE
  s"YPUSHING;044=THETRANSCEIVERALSOEXITSTHE$3#MODE
  sh ” continues to blink and the Call is stored in the Received
Call Log.
[INFO]
±Push to display the Received call information. (p. 65)
[ACPT]
Push to accept the call. ±
And then, push [CH 16] to switch the operating channel
to Channel 16, and then monitor it, as a coast station
may require assistance.
  s)FYOUHAVENTPUSHED;#(=WITHINSECONDSTHEOPERAT-
ing channel automatically switches to Channel 16. (p. 69)
Push