User's Manual

65
7
DSC OPERATION
D Receiving a Test Acknowledgement Call
When a Test Acknowledgement Call is received:
The alarm sounds for 2 minutes. ±
“Received ACK” pops up. The LCD backlight blinks for 2 ±
minutes.
Received Call log N
The transceiver automatically stores up to 50 distress mes-
sages and 50 other messages, and they can be used as a
supplement to your logbook.
s7HILEINTHENORMALOPERATINGMODEh ” blinks in the upper right
corner of the LCD when there is an unread DSC message.
Distress message D
Push the soft key [LOG] to enter “RCVD CALL LOG” in the q
DSC CALLS menu, or you can enter it through the Menu
screen.
eMENUf ¶ eDSCf ¶ eReceived Call Logf
(Push [MENU]) (Select icon) (Rotate Dial, then push [ENT].)
Push [ w Y] or [Z] to select “Distress,” then push [ENT].
s4HE$ISTRESSMESSAGESARESTOREDINh$ISTRESSv
sh ” appears when there are unread DSC messages.
sh ” appears when there are no unread DSC messages.
 s.OICONAPPEARSWHENTHEREARENO$3#MESSAGES
q Push [ALARM OFF] to stop
the alarm and the blinking
backlight.
 s)F;!,!2-/&&=ISNOTPUSHED
within 2 minutes, the next
screen may appear, depending
on the received Category.
w Push a soft key to select your
desired action.
[EXIT]
± Push to return to the nor-
mal operating mode.
  s4HE TRANSCEIVER EXITS THE
DSC mode.
  sh ” continues to blink and
the Call is stored in the Re-
ceived Call Log.