User's Manual

73
7
DSC OPERATION
After making the individual DSC call, the transponder will r
display “DSC Transmission COMPLETED.”
 s0USH;#,%!2=TORETURNTOTHESCREENDISPLAYEDBEFOREYOUEN-
tered the voice channel selection screen in step w.
s4HETRANSCEIVERSTANDSBYON#HANNELUNTILANACKNOWLEDGE-
ment is received.
Transponder’s display Transceiver’s display
Step 2: Transceiver’s operation
When the acknowledgement is received, beeps sound. t
If the acknowledgement ‘Able to comply’ is received, ±
push [ALARM OFF] to stop the beeps, and then select
the intership channel specified in step w.
  s!DIFFERENTINTERSHIPCHANNELWILLBESELECTEDIFTHESTATIONYOU
called cannot use the channel.
  s4OREPLYPUSH;044=ANDSPEAKATANORMALVOICELEVEL
  s9OUCANCHECKTHE--3)CODEORTHENAMEIFPROGRAMMED
of the AIS target on the display.
If the acknowledgement ‘Unable to comply’ is received, ±
push [ALARM OFF] to stop the beeps, and then return
to the operating channel before you entered the MENU
screen.
y
After the communication is finished, push [EXIT] to return
to the normal operating mode.
[DSC]
[CLEAR]
[Z]
[Y]
TRANSPONDER
‘Able to comply’ is received
‘Unable to comply’ is received