User Manual

– 2 – – 3 –
Step 4 About the setting screen
q Open your web browser, then enter the IP address of the
AP-90M into the address bar.
*The default IP address is “
//192.168.0.1/.”
w Push the [ENTER] key.
 •TheLoginAuthenticationscreenwillappear.
e Enter“admin”(fixedusername)and“admin”(defaultpass-
word)intheirrespectiveinputfieldsintheLoginAuthenti-
cation window, and then click [OK].
 •Whenaccessingthewebbrowserforthersttime,settingthe
time zone is required. See the “Setting the interface language and
the Time Zone” leaflet for details.
To prevent unauthorized access
You must carefully chose your password, and change
it occasionally. See page 4 of this connection guide for
password setting details.
•Chooseonethatisnoteasytoguess.
•Usenumbers,charactersandletters(bothloweranduppercase).
About web browsers
We recommend using Microsoft Internet Explorer 9 or
later versions with the AP-90M.
Enable JavaScript
®
and set to allow Cookies on your web
browser to correctly display the setting screen.
If other browsers are used, the screen may not be
correctly displayed.
192.168.0.1/
Enter
q Enter
w Click
About the setting screen
•Tocheckthesettingscreen’sonlineinstructions,placethecursor
on a setting item, and click “?” when it appears.
q Link to the Icom web site
If your PC is connected to the Internet, click the Icom logo to
open the Icom web site.
w Setting menu
Displays the screen name list on a menu line. When you
click each menu title, a list of items drops down which you
can use to select the desired setting item.
e Setting screen
Displays the settings and values when you click the screen
name.
r Setting buttons
Save or cancel the setting values.
If “A reboot is required to apply all the new settings” is dis-
played on the screen when you click [Apply], click [Reboot].
The AP-90M reboots, and the setting items and values are
updated.
The above message is displayed on the screen while the
AP-90M is rebooting.
•IftheAP-90Misstillrebooting,clicking[Back]doesnotreturntothe
setting screen. Retry when the rebooting is complete.
•Itemsandbuttonsmaydiffer,dependingonthesetting.
q
w
r
e
Step 3 Connecting and turning ON the power
R
WARNING!
To prevent electrical shock, television interference (TVI),
broadcast interference (BCI) and other problems, ground the
AP-90M through the ground terminal.
NEVER connect the ground terminal to a gas or electric pipe.
This may result in an electrical shock or cause a fire.
IP address for PC
The AP-90M’s IP address is set to “192.168.0.1”, and DHCP
server to “Disable” as default. Set the connecting PC to
“192.168.0.100”.
See the PC’s instruction manual for the IP address setting
details.
AP-90M
WIRELESS ACCESS POINT
Antenna attachment
Antenna ×2
(Supplied)
Rotate to
the right
45º
90º
0º
Ground wire
(Purchase separately)
Ground terminal
Power adapter
(Purchase separately)
AC outlet
AP-90M
PC
To the ground terminal
To the DC jack
To the [LAN] port
LAN cable
(Purchase separately
：Category 5e or higher)
(Example： 192.168.0.100)
（Default： 192.168.0.1)
Cushion sheet
(Supplied)
Hole
Sheet
w
Connect
cables
e
Connecting the
power adapter
r
Start the PC
t
Indication check
y
Cushion sheet
attachment*
2
q
Connect
cables
*1 Indication differs,
depending on the status
*2
Before attaching the
supplied mounting
bracket, first install the
supplied magnets into
the holes.
*2 Before attaching the
supplied mounting
bracket, first install the
supplied magnets into
the holes.
Green
Green/Orange
*
1
Orange
Orange
[POWER]:
[LAN]:
[WIRELESS1]:
[WIRELESS2]:
For the best performance, attach both antennas.
In case you find difficulties receiving signals,
change the antenna’s direction or its location.
Menu Setting screen Setting Title Default setting
Network Settings IP Address IP Address IP Address 192.168.0.1
Subnet Mask 255.255.255.0
DHCP Server DHCP Server DHCP Server Disable
Wireless Settings Wireless LAN Wireless LAN FrequencyBand 2.4GHz(Wireless1)
*3
5GHz(Wireless2)
*3
Bandwidth 20 MHz
VirtualAP VirtualAP Interface ath0(Wireless1)
ath4(Wireless2)
SSID WIRELESSLAN-0
Security Authentication Open System/Shared Key
Encryption None
Management Administrator Administrator Password Username admin(Cannotbechanged)
Current Password admin(Lowercaseletters)
About default settings D
*
3
ThewirelessLANunitforWireless1(internalantenna)andWireless2(externalantenna).
Wireless 1 and 2’s frequency bands cannot be used when both of them are set to 2.4 GHz or 5 GHz.
The“IEEE802.11ac”standardcanonlybeusedwhen5GHzisselectedinWireless2(externalantenna).
About the setting screen
The following procedures describe how to use the
AP-90M setting screen using a web browser.
Step 5 Connecting with wireless LAN
The following procedures describe how to connect to the AP-90M through a wireless LAN, based on Microsoft
®
Windows
®
7.
q Start the AP-90M, and then turn ON the PC.
w Click the Wireless Network Connection icon.
 •Itmaytakeafewminutesuntiltheiconappears.
e Select the SSID set to the AP-90M and click [Connect].
Then follow the instructions.
 •TheSSIDissetto“WIRELESSLAN-0”bydefault.
Click
q Select
w Click
Followthesteps(q to y)toconnectwiththeAP-90M,andchecktheindicationsasdescribedbelow.
•IfyouareconnectingtheAP-90Mwithitsdefaultsettings,disconnectthenetworksfromyourPC.
•If[LAN]doesnotlight,checktheLANcableandtryagain.