User's Manual

ManualsBrandsICOM ManualsElectronicsVHF Digital Transceiver

– 4 –

1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan

Thank you for choosing this Icom product.

READ ALL INSTRUCTIONS carefully and completely

before using this product.

INSTRUCTIONS

VHF P25 TRANSCEIVER

Iç-F7520

UHF P25 TRANSCEIVER

Iç-F7510

SUPPLIED ACCESSORIES

This instruction sheet includes some functions that are

usable only when they are preset by your dealer. The

transceiver may have other functions and operations that

are not described in this instruction sheet. Ask your dealer

for preset function details.

IMPORTANT

NOTE: Some accessories may not be supplied, or the

shape may be different, depending on the transceiver

version.

A key element in the performance of any communication

systems is the antenna. Contact your dealer for information

regarding antennas and how to install them.

ANTENNA

Fuses are installed in the supplied DC power cable. If a fuse

blows, track down the source of the problem, repair it, and

then replace the damaged fuse with a new rated one.

 Fuse rating: 20A

USE only 20 A fuses

FUSE REPLACEMENT

If the transceiver becomes dusty or dirty, wipe it clean with a

soft, dry cloth.

DO NOT use harsh solvents such as Benzine or

alcohol, as they may damage the transceiver's

surfaces.

CLEANING

DC power cable

Sponges*

Mounting bracket

Flat washers Spring washers

Bracket bolts Mounting screws

(M5×12)

Self-tapping screws

(M5×16)

Nuts

Used for labelling the pro-

grammable function keys

according to their assinged

functions.

Used for the optional unit

installation.

Ask your dealer for details.

Function name

stickers*

Microphone

(Self-grounding type)

Microphone hanger

and screw set

A-7383D-1EX Printed in Japan

– 1 –

Icom, Icom Inc. and the Icom logo are registered trademarks of Icom

Incorporated (Japan) in Japan, the United States, the United Kingdom,

Germany, France, Spain, Russia, Australia, New Zealand, and/or other

countries.

The Bluetooth word mark and logos are registered trademarks owned by

Bluetooth SIG, Inc. and any use of such marks by Icom inc. is under license.

All other products or brands are registered trademarks or trademarks of their

respective holders.

FUNCTION DISPLAY

Icon Area

Text Area

Key Display Area

NOTE: The screen capture

is an example. The

displayed position of each

icon may differ, depending

on the function being used.

D Icon Area

Indicators

q SIGNAL STRENGTH INDICATOR

Displays the relative received signal strength.

w CLOCK

Displays the current time.

 “AM” or “PM” is displayed beside the time display when the 12

hour display format is selected.

 “--:--” is displayed instead of the current time when the internal

clock is not set.

Icons

POWER ICON

• “L1” is displayed when the output power is set to low.

• “L2” is displayed when the output power is set to mid.

• “H” is displayed when the output power is set to high.

AUDIBLE ICON

Displayed when the channel is in the ‘audible’ (unmute) mode.

MESSAGE ICON

• Blinks after messages (Message or Status Message) have been

received.

• Stops blinking when the screen is changed, or any key is pushed,

but is displayed if unread messages are still in the Message memory.

• Disappears when all messages in the Message memory have

been read.

BELL ICON

Displayed when a matching signal is received, depending

on the presetting.

SCAN ICON

• Displayed when a scan is paused.

• Blinks while a scanning.

SCAN TARGET CHANNEL ICON

• Displayed when the channel is selected as a scan target channel.

SCRAMBLER ICON

In the Analog mode:

• Displayed when the Voice Scrambler function is ON.

GPS ICON

• Displayed when valid position data is received.

• Blinks when searching for satellites or calculating position data.

RECORD ICON

• Displayed when the Record function is ON.

• Blinks while recording audio.

 “R” is displayed when there is no microSD card free space and

you cannot record audio.

TALK AROUND ICON

Displayed when the Talk Around function is ON.

PHONE ICON

• Displayed when the transceiver is connected to a telephone

network on the selected channel.

• Blinks while receiving a phone call.

LONE WORKER ICON

Displayed when the Lone Worker function is ON.

NOISE CANCEL ICON

Displayed when the Noise Cancel function is ON.

SURVEILLANCE ICON

Displayed when the Surveillance function is ON.

VOX ICON

Displayed when the VOX function is ON.

Bluetooth

ICON

• Displayed when Bluetooth

is activated.

• Lights Blue when a Bluetooth

device is connected.

• Does not light when no Bluetooth

device is connected.

microSD ICON

Displayed when a microSD card is inserted.

 “R” is displayed when the microSD card has not been formatted.

USB ICON

Displayed when a USB device is connected.

D Text Area

Displays the selected Zone number, Channel number, and

Channel name, if set.

D Key Display Area

Displays the assigned function of [P1] and [P2].

 Ask your dealer about the assigned Software key function.

Summary of content (4 pages)

PAGE 1
FUNCTION DISPLAY INSTRUCTIONS w VHF P25 TRANSCEIVER Icon Area q Iç-F7510 UHF P25 TRANSCEIVER Iç-F7520 NOTE: The screen capture is an example. The displayed position of each icon may differ, depending on the function being used. Thank you for choosing this Icom product. READ ALL INSTRUCTIONS carefully and completely before using this product. Text Area Key Display Area D Icon Area Indicators q SIGNAL STRENGTH INDICATOR Displays the relative received signal strength.
PAGE 2
PANEL DESCRIPTION REAR PANEL CONNECTION NOTE: Different functions may have been assigned to the keys by your dealer, except for the Power key. Status indicator Function display Antenna q ANTENNA CONNECTOR Connect to an antenna. Contact your dealer about antenna selection and placement. w GPS ANTENNA CONNECTOR Connect the UX-241 GPS antenna.
PAGE 3
PRECAUTIONS VHF P25 TRANSCEIVER Iç-F7510 UHF P25 TRANSCEIVER Iç-F7520 Thank you for choosing this Icom product. READ ALL PRECAUTIONS carefully and completely before using this product. EXPLICIT DEFINITIONS WORD DEFINITION RDANGER! Personal death, serious injury or an explosion may occur. RWARNING! Personal injury, fire hazard or electric shock may occur. CAUTION NOTE Equipment damage may occur. If disregarded, inconvenience only. No risk of personal injury, fire or electric shock.
PAGE 4
SAFETY TRAINING INFORMATION W ARN ING Your Icom radio generates RF electromagnetic energy during transmit mode. This radio is designed for and classified as “Occupational Use Only”, meaning it must be used only during the course of employment by individuals aware of the hazards, and the ways to minimize such hazards. This radio is NOT intended for use by the “General Population” in an uncontrolled environment.