Instruction Manual

18
8
SET MODE
■ Set mode items
NOTE: The Set mode items contained in
the transceiver may be different, depending
on the transceiver’s version or presettings.
Ask your dealer for details.
Beep “ ”
Turns the Key Beep function ON or OFF.
OFF: Turns OFF the function for silent
operation.
ON: When a key is pushed, a beep
sounds.
WX Alert “ ”
(For the USA, EXP, CHN, and AUS versions)
Turns the Weather Alert function ON or
OFF. This function detects the Weather
Alert tone on Weather channels.
OFF: The transceiver does not detect a
Weather Alert tone.
ON: The transceiver detects the 1050
Hz Weather Alert tone on a Weather
channel.
Scan Type “ ”
(Except the HOL version)
Turns the Priority Scan function ON or OFF.
OFF: The scan type is set to “Normal,”
which sequentially searches all
Favorite channels in the channel
group.
ON:
The scan type is set to “Priority,”
which sequentially searches all
Favorite channels in the channel
group, while also periodically checking
Channel 16 (Priority channel).
Scan Timer “ ”
(Except the HOL version)
Turns the Scan Resume Timer ON or OFF.
OFF:
When a signal is detected on a
channel, the scan pauses until the
signal disappears, and then resumes.
ON: When a signal is detected on a
channel, the scan pauses for 5
seconds, and then resumes. If
the signal disappears in less than
5 seconds, the scan immediately
resumes.
Auto Scan “ ”
(Except the HOL version)
Turns the Automatic Scan function ON or OFF.
OFF: The function is OFF.
ON: Scan automatically starts when no
signal is received, or no operations
are carried out for 30 seconds.
Dual/Tri-watch “ ”
(Except the HOL version)
Selects Dualwatch or Tri-watch.
d- (Dual): Periodically checks Channel
16 while operating on another
channel.
t- (Tri): Periodically checks Channel
16 and the Call channel while
operating on another channel.
SQL Key Action “ ”
The function temporarily opens the squelch.
Pu (Push): The Monitor function is activated
by holding down [VOL/SQL] for
more than 1 second.
The squelch opens while
holding down the key.
Ho (Hold):
The Monitor function is activated
by holding down [VOL/SQL] for
more than 1 second.
The squelch stays open until
the user pushes any key.
Backlight “ ”
Turns the Automatic Backlight function ON
or OFF.
OFF: The function is OFF.
ON:
The backlight turns ON for 5 seconds
when the user pushes any key
except [PTT].
Contrast “ ”
Selects the transceiver’s display contrast.
Hi: The transceiver’s display contrast is set
to High.
Lo: The transceiver’s display contrast is set
to Low.