User Guide

3
WHEN RECEIVING A DSC CALL
11
D When receiving an individual call
When receiving an individual
call, an alarm (Pi-pi) sounds.
• Push [ENT], then the oper-
ating channel changes to
the designated channel.
• Push [CLR] to record the
received information, then
the screen goes back to de-
fault.
• The calling station transmits via voice on the designated
channel.
• When the individual ACK function is available
When the individual acknowl-
edgement function is available
on your controller, push [ENT]
to turn to the <Select to com-
ply> screen.
• Select ‘Able to comply’ or
‘Unable to comply’.
• Emergency alarm (or con-
tinuous beeps depending
on the category) sounds until pushing [CLR].
<Select to comply>
≈Able to comply
Unable to comply
<CLR➝Exit/ ENT➝OK>
—RCV Individual call—
From: JOHN
<CLR➝Exit/ ENT➝OK>
DS-100#02-(2) 01.12.13 10:53 AM Page 11 (1,1)