Congratulations! You have: purchased ong 0F the finest Pisces of tamale equipment available anywhere i the world: You: know, because it's: from COM. The DV S 21 was designed s an ‘exclusive’ textual 'VEQ for the FRACTAL It has several unique functions that will add: great convince 'and: versatility ‘to: your: transceiver: Two ‘models .of VLD are available. "One 'for operation ‘between ‘44 146MHz and the ‘other for operation ‘between 146 Tarmac.
(o ple Connection of power: cord: Two ‘power: cords are provided as accessories for: AG: or DC operation. The AC cord is Grey: and the: DC cord is red and you use @ DC power supply. be sure:to chick the voltage in advance to e ure it is 12515 volts: Be sure 1o connect the ‘Red lead to ‘positive and the Black lead to negative (11 misconstruction: mishmash the built in protection circuit will cause the fuse to blow.
Frequencies: are: selected iii: the following manna; Place the: 0~ SK Hz swinish: the OK Hz position. Be sure the "SCAN' indicator on the display panel'is not push: the: SCN key and: “the: indicator should: go ‘our: Now pud hi the' appropriate Patienter key :for the frequency: desired:: Press. ‘the number: Rey: representing ‘the desired: Bouzouki: Finally: push the: number Key: representing: the desired Tokyo If the: kHz digit of the. desired: frequencies: ¢ there iy o node o pressie: 0 Key: 25. 0.
Open {frequency Scan Mace the DIG-OPEN switch the :OPEN position and ‘push:the: SCN key. The: scan indicator will hist up and the scanning. begins. The scanning will stop once frequency which has: o’ signal; and 'as ‘described above: will ‘begin after the. pause time hay chased; Auto: Select of signal Frequencies ; Ta en: the SCANDALOUS switch to the \LOCK: position the DIG-OPEN switch the SIG ‘position and push the Sean key: The: scanning indicator is it and scanning begin.
Modifying other: ICON Transceivers ACC Socket o accept the DC-21 Plug Grey(100) White (400} Mike Connector: G AF Unities) Moot O RIT Baseboard (P207) TRI0A(28C372 10 Me How {100} Emitter 1EK: 18K gosh Emitter Disconnect all: the Reads of the ACC socket (TP except the earth lead, and then bind the disconnected wives with insulating tape' or similar material ¥o avoid fsk of accident. The pin 6 lead (pink) relays the power supply (9V) of the R OSC circuit, and 5o should -be spliced or connected With ‘tip (5.
