Operation Manual

■ Quick set mode items
Q1 RF POWER (all modes)
This item adjusts the RF output power. The RF out-
put power can be adjusted from L, 1 to 9 and H for in-
dication, however, it can be adjusted continuously.
The default is H (maximum power).
Note that while adjusting the output
power, the power meter is displayed
automatically.
Q2 MIC GAIN (SSB/AM/FM modes)
This item adjusts microphone gain from 1 to 10 for in-
dication, however, it can be adjusted continuously.
The default is 5.
Note that while adjusting mic gain, the
ALC meter is displayed automatically.
Q2 KEY SPEED (CW mode)
This item adjusts the CW key speed. The key speed
can be selected from 6 to 60 wpm.
The default is 20 wpm.
CW
Q2 RTTY REV (RTTY mode)
This item selects RTTY or åRTTY (RTTY reverse)
mode.
The default is normal.
R TT Y
Q3 CW REV (CW mode)
This item selects CW or CWå (CW reverse) mode.
The default is normal.
CW
Q3 CARRIER Frq (SSB mode)
This item adjusts the carrier frequency (BFO fre-
quency), allowing you to change the audio character-
istics. Selectable values are –200 to +200 Hz in 10 Hz
steps.
USB
The default is 0 Hz.
Q2 CAR SIDE (SSB-D mode)
This item selects the carrier point. USB mode or LSB
mode are selectable.
The default is LSB mode.
LSB
75
12
SET MODE
Mode Set mode item Default setting
Q1 RF POWER H
SSB Q2 MIC GAIN 5 level
Q3 CARRIER Frq 0 [Hz]
Q1 RF POWER H
CW Q2 KEY SPEED 20 [WPM]
Q3 CW REV n (normal)
Mode Set mode item Default setting
RTTY
Q1 RF POWER H
Q2 RTTY REV n (normal)
SSB-D
Q1 RF POWER H
Q2 CAR SIDE L (LSB side)
FM/AM
Q1 RF POWER H
Q2 MIC GAIN 5 level