Operation Manual

78
12
SET MODE
* 18 AUTO OFF
The auto power OFF function can be used to auto-
matically turn the transceiver OFF after a specified
time of operation. This item can be set to 30 min., 60
min., 90 min., 120 min., or OFF.
Auto power OFF set to
20 min.
Auto power OFF
deactivates. (default)
* 13 SYNC TUNING
This item selects the displayed frequency shift func-
tion from ON and OFF.
When this function is activated, the receiving signal
can be kept in receive even when the operating mode
is changed between SSB and CW.
oN : The displayed frequency shifts when the oper-
ating mode is changed between SSB and CW.
oFF: The displayed frequency does not shift. (default)
The frequency shifting value may differ according
to the CW pitch setting.
Synchronous tuning ON
Synchronous tuning OFF
(default)
15 KEY LIGHT
The key/switch backlighting can be set to high, low or
OFF to suit ambient lighting.
Key/switch backlighting
set to high (default).
Key/switch backlighting
set to low.
17 LED BRIGHT (LED brightness)
The LED brightness control for front panel can be set
to high or low.
LED brightness set
to high.
LED brightness set
to low (default).
* 16 LIGHT TIMER
The Light timer can be set to AUTO, ON or OFF to
suit lighting condition.
Auto: Automatically select “on” or “oFF” depends on
power supply voltage. (default)
on : Lights when some operation is performed, goes
out after 5 sec.
oFF : Lights continuously during transceiver power is
ON.
Default is Auto.
14 BACK LIGHT
The function display backlighting can be set to high,
low or OFF to suit ambient lighting.
Display backlighting set to
high (default).
Display backlighting set to
low.
(SSB/CW frequency shift setting)
(Display backlighting)
(Key/switch backlighting)
(Light timer setting)
(Automatic power OFF)
12
When “3 SIMPLE MODE” is set to ON, * marked items are undisplayed.