Operation Manual

81
12
SET MODE
32 PWR ON CHK
This item selects the indication ON or OFF when turn-
ing power ON.
on : The Transceiver briefly displays ‘All indication,’
‘RF power’ and ‘Power supply voltage’ when
turning power ON.
oFF: The display goes directly to frequency indication
at power ON.
Power on check ON
(default)
Power on check OFF
* 35 TUNER SW
This item select BAND or ALL.
bAnd : [TUNER] switch ON/OFF condition is re-
mained for each band.
ALL : [TUNER] switch ON/OFF condition is com-
monly remained for all band.
The default is BAND.
* 34 PTT TUNE (PTT tune function)
This item set the PTT tuner start function ON or OFF.
This function activates internal tuner and optional AT-
180/AH-4 ANTENNA TUNER , when connected.
on : The tuner is always tuned when the PTT is
pushed after the frequency is changed (more
than 1% from last-tuned frequency). (Internal
tuner or connected AT-180)
Tuning can be started automatically at the mo-
ment the PTT is pushed. (Connected AH-4)
oFF : PTT tuner start function OFF.
Tuning starts when pushing
[PTT] on a new frequency.
Tuning starts only when
[TUNER] is pushed
(default) .
* 33 A-TUNE STRT
The optional AT-180
ANTENNA TUNER
has an automatic
start capability which starts tuning if the SWR is
higher than 1.5–3.
oFF: The tuner remains OFF even when the SWR is
poor (1.5–3).
on : Automatic tune starts even when the tuner is
turned OFF.
NOTE: Even when “on” is selected, automatic tune
does not start for the 50 MHz band.
Auto tune function OFF
(default).
Auto tune function ON.
36 9600 MODE (Packet data speed)
This item is used to change the communications
speed for packet operation. The data socket speed
can be set to 1200 or 9600 baud.
Default is 9600 baud.
(Auto tune start function)
When “3 SIMPLE MODE” is set to ON, * marked items are undisplayed.
(Power on check function)
(Tuner switch condition)