Operation Manual

PANEL DESCRIPTION

■ Microphone keypad

KEY FUNCTION SECONDARY FUNCTION ( +key) OTHER FUNCTIONS

Switches between opening and closing the

squelch. (p. 13)

Starts and stops scanning. (p. 38)

Starts and stops priority watch. (p. 44)

Selects high output power. (p. 16)

Selects mid. output power. (p. 16)

Selects low output power (p. 16)

Selects minus duplex operation. (p. 18)

Selects plus duplex operation. (p. 18)

Selects simplex operation. (p. 18)

No primary function.

In memory mode switches the channel names

or number indication ON and OFF. (p. 30)

Starts and stops tone scanning. (p. 51)

Turns the one-touch PTT function ON and

OFF. (p. 16)

Turns the DTCS squelch ON. (p. 50)

*Turns the DSQL function. (p. 67)

Turns the DTCS pocket beep function ON. (p. 49)

*Turns the DSQL pocket beep function.

Turns the DTMF memory encoder function

ON. (p. 45)

Turns the subaudible tone encoder ON.

(p. 18)

Turns the CTCSS pocket beep function ON.(p. 49)

*Turns the CSQL pocket beep function.

Turns the tone squelch function ON.

(p. 50)

*Turns the CSQL function. (p. 67)

Sends a 1750 Hz tone signal while pushing

and holding. (p. 20)

After pushing :

Transmits the

appropriate DTMF code.

(pgs. 20, 46)

When the DTMF memory en-

coder is activated, push [0] to

[9] to transmit the appropriate

DTMF memory contents.

(p. 46)

*While in the digital mode operation with the installing an optional Digital unit UT-118.