Operation Manual

86
13
OTHER FUNCTIONS
13
■ Data cloning
Cloning allows you to quickly and easily transfer the pro-
grammed contents from one transceiver to another; or , data
from a personal computer to a transceiver using the optional
CS-2200H
CLONING SOFTWARE .
D Cloning between transceivers
q Connect the OPC-474 cloning cable to the [SP] jack of the
master and sub-transceivers.
• The master transceiver is used to send data to the sub-trans-
ceiver.
w While pushing [M/CALL
]
, turn power ON to
enter cloning mode (mas-
ter transceiver only—
power on only for sub-
transceiver).
• “CLONE” appears and the
transceivers enter the clone
standby condition.
e Push [S.MW ] on the
master transceiver.
• “CL OUT” appears in the
master transceiver’s display
and the S/RF indicator shows
that data is being transferred
to the sub-transceiver.
• “CL IN” appears automati-
cally in the sub-transceiver’s
display and the S/RF indica-
tor shows that data is being
received from the master
transceiver.
r When cloning is finished,
turn power OFF, then ON
to exit cloning mode.
MW
LOCK
S E T
ANM
MONI
DUP
LOW
T
-
SCAN
TONE
PRIO
M/CALL
SCAN
V/MHz
DIGITAL
PRIO
AO
BUSY
MUTE
NAR
MID
LOW
Push to start cloning
(master transceiver).
MW
S.MW
PRIO
LOCK
S E T
ANM
MONI
DUP
LOW
T
-
SCAN
TONE
PRIO
M/CALL
SCAN
V/MHz
DIGITAL
PRIO
AO
BUSY
MUTE
NAR
MID
LOW
PRIO
M/CALL
( ),
While pushing
turn power ON.
AT POWER ON