User Guide

ManualsBrandsIcom ManualsMarine RadioIC-2200H

MEMORY OPERATION

■ Programming channel names

Each memory channel and the call channel can be pro-

grammed with an alphanumeric channel name for easy

recognition and can be indicated independently by channel.

Names can be a maximum of 6 characters— see the table

below for available characters.

q Push [M/CALL ] to select memory mode.

Rotate

[DIAL]

to select the desired memory channel.

e Push [MONI ] for 1 sec. to select channel name indi-

cation mode.

•1 short and 1 long beep sound.

r Push [SET ] to select the channel name program-

ming condition.

• Frequency readouts disappear.

t Rotate [DIAL] to select the desired character.

• The selected character blinks.

y Push [SET] or [MONI] to move the cursor to left or right,

respectively.

u Repeat steps t and y until the desired channel names

are displayed.

i Push any key other than [SET] or [MONI] to program the

name and exit the channel name programming condition.

o Push [MONI ] for 1 sec. to return to frequency indi-

cation if desired.

IMPORTANT!: Once channel name indication mode is

selected, always access the channel name programming

condition when [SET ] is pushed.

When set mode accessing is necessary, cancel the chan-

nel name indication by pushing [MONI ] for 1 sec.,

then access to set mode.

ANM

LOCK

ANM

LOCK

ANM

PRIO

(1)

(B)

(L)

(V)

(+)

(2)

(C)

(

)

(

)

(–)

(3)

(

)

(N)

(X)

(=)

(4)

(E)

(O)

(Y)

(✱)

(5)

(F)

(P)

(Z)

(/)

(6)

(G)

(

)

(space)

(7)

(()

(

)

(

)

())

(8)

(I)

(S)

(|)

(9)

(J)

(T)

(0)

(A)

(

)

(U)

[EXAMPLE]: Programming “CLUB” into memory channel 1.

LOCK

ANM

MONI

DUP

LOW

SCAN

TONE

PRIO

M/CALL

SCAN

V/MHz

DIGITAL

PRIO

BUSY

MUTE

NAR

MID

LOW

LOCK

ANM

MONI

DUP

LOW

SCAN

TONE

PRIO

M/CALL

SCAN

V/MHz

DIGITAL

PRIO

BUSY

MUTE

NAR

MID

LOW

LOCK

ANM

MONI

DUP

LOW

MUTE

NAR

MID

LOW

LOCK

ANM

MONI

DUP

LOW

MUTE

NAR

MID

LOW

ANM

MONI

( )

LOCK

SET

( )

ANM

MONI

( )

LOCK

SET

( )

ANM

MONI

( )

Push any other keys than

or .

Select memory channel 15,

then push for 1 sec.

Push or

to move the cursor.

Rotate to select the

character.

Repeat

steps.