User Manual

RECEIVE AND TRANSMIT

q Push [MODE] for 1 sec. to open

the squelch.

• Adjust volume to the desired

audio level. (See p. 8)

Select a desired operating channel.

When a signal is received:

• “ ” appears in the display.

• Squelch opens and audio is emit-

ted from the speaker.

• Further adjustment of [VOL] may

be necessary at this point.

e Push and hold [PTT] to transmit

then speak into the microphone.

• Do not hold the transceiver too

close to your mouth or speak too

loudly. This may distort the signal.

• The transmit indicator “ ” ap-

pears in the display.

r Release [PTT] to return to receive.

Time-Out Timer (TOT)

The transceiver has a time-out timer function. This function pre-

vents continuous, extended transmissions. This timer turns the

transmission OFF 3 min. after it starts.

A warning beep sounds 10 sec. before the limit is reached, and

the time-out timer turns OFF the transmission automatically. An-

other beep sounds to announce the end of the transmission.

Busy indicator

appears.