Marine Radio User Manual

■ Selecting VFO/memory mode
27
3
BASIC OPERATION
q Select
M
- 1
.
w Push [F-2
A/B
] to toggle VFO A or VFO B.
[MENU/GRP] [F-2]
Either “ ” or “ ” appears.
D
Selecting VFO A/VFO B
q Select
M
- 1
.
w Push [F-2
A/B
] for 1 sec. to set the undisplayed
VFO frequency and mode to those of the displayed
VFO.
•Three beeps sound when the VFO equalization is com-
pleted.
CONVENIENT
Use two VFOs as a quick memory
When you find a new station, but you wish to continue
searching, the Two VFO system can be used for quick
memory storage.
q Push [F-2
A/B
] for 1 sec. to store the displayed fre-
quency into the undisplayed VFO.
w Continue searching for stations.
e Push [F-2
A/B
] to retrieve the stored frequency.
r To continue searching for a station, push [F-2
A/B
]
again.
Push
then push again.
for 1 sec.,
D
VFO equalization
■ VFO operation
q Select
M
- 2
.
w Push [F-4
V/M
] to toggle VFO and memory
modes.
“VFO” indicator
Memory channel
indicator
[MENU/GRP] [F-4]
Menu group selection
Push [MENU/GRP] for 1 sec.
Selection from:
M
,
S
or
G
(Graphic)
Menu selection (Example: M)
Push [MENU/GRP] momentarily.
Selection from:
M - 1
,
M - 2
or
M - 3
Either
Y or Z
Either
Y or Z