Operation Manual

91
6
FUNCTIONS FOR TRANSMIT
D Quick split setting
q Enter the miscellaneous (others) set mode as
above.
w Push [F-1
≤≤
] or [F-2
≥≥
] to select “
QQuuiicckk
SSPPLLIITT
,” then rotate [DIAL] to select the desired
setting.
•Push [F-4
DDEEFF
] for 1 sec. to return to default setting.
e Push [
ZZ
(
MENU / GRP )] twice to return the normal op-
erating mode.
DD
Split offset frequency setting
By setting an often-used split frequency offset in ad-
vance, you can operate the quick split function to se-
lect split operation at the push of one key.
q Push [AF(
SET )] momentarily to enter the set mode
menu.
w Push [F-4
OOTTHH
] to enter the miscellaneous (oth-
ers) set mode.
e Push [F-1
≤≤
] or [F-2
≥≥
] to select “
SSPPLLIITT OOffff--
sseett
.”
r Rotate [DIAL] to set the desired split offset.
•The split offset can be selected from –9.999 MHz to
+9.999 MHz.
•Push [F-4
DDEEFF
] for 1 sec. to return to default value.
t Push [
ZZ
( MENU / GRP )] twice to return the normal op-
erating mode.
[DIAL][MENU/GRP]
[AF]
[F-1] [F-2] [F-4]