Operation Manual

98
7
VOICE RECORDER FUNCTIONS
7
q Select
SS
-- 11
.
w Push [F-1
VVOO
] to call up the voice recorder menu.
•If the receive voice memory channels screen appears,
push [
ZZ
(
MENU / GRP )] then push [F-2
TTXX
] to select the
transmit voice memory channel.
•If the voice root menu appears, push [F-2
TTXX
] to select
the transmit voice memory menu. The voice recorder
starting menu can be changed in the miscellaneous
(others) set mode.
e Push [F-1
TT11
] — [F-4
TT44
] to transmit the con-
tents.
•“
TT11
”– “
TT44
” are highlighted while transmitting.
r Push the selected memory channel key, [F-1
TT11
]
— [F-4
TT44
], again to stop, if desired.
t Push [
ZZ
( MENU / GRP )] twice to exit the voice mem-
ory screen.
For your information
When an external keypad is connected to the pin 2
and pin 7 of the [MIC] connecter, the recorded
message, T1–T4, can be transmitted without open-
ing the voice recorder set screen.
See page 135 for details.
[MENU/GRP] [F-2] [F-3] [F-4]
[F-1]
■ Sending a recorded message
q Call up the voice memory recording mode as de-
scribed in steps q to w as above.
w Push [
YY
( MENU / GRP )] to select the voice memory
transmit level set mode.
e Push the desired memory channel key, [F-1
TT11
]–
[F-3
TT33
], momentarily to transmit the contents.
r Rotate [DIAL] to adjust the transmit voice level.
•Push [F-4
DDEEFF
] to select the default condition.
t Push [
ZZ
( MENU / GRP )] to return to the voice recorder
screen.
D Transmit level setting