Operation Manual
101
8
MEMORY OPERATION
q Push [PBT/M-ch/RIT] momentarily to select the M-
ch/RIT function, if the twin PBT is selected.
•[PBT/M-ch/RIT] indicator (Green) goes out.
w Set the desired frequency and operating mode in
VFO mode.
•If you want to program the split frequency function, pro-
gram both receive and transmit frequencies into VFO
A and B, then turn ON the split function. (p. 89)
•If you want to program a repeater function, set a tone
frequency (p. 60) in addition to the receive/transmit fre-
quencies.
e Select
MM
--
22
.
r Push [F-1
MMEEMM
] to display the memory channel
contents.
•Memory channel contents appear above the multi-func-
tion key indicator.
•Push [F-1
LLSSTT
] to display the memory channel list.
This is convenient for selecting the desired channel.
Push [
ZZ
(
MENU
/
GRP
)] to exit the memory channel list.
t Rotate [M-ch] to select the desired memory chan-
nel.
•“ ” and “---,---,--” appear if the selected memory
channel is a blank channel (and does not have con-
tents).
•Rotating [RIT] (outer) control changes the bank.
y Push and hold [F-2
MMWW
] for 1 sec. to program the
displayed frequency and operating mode into the
selected memory channel.
To check the programmed contents, push [F-4
VV//MM
]
to select memory mode.
[EXAMPLE]: Programming 7.088 MHz/LSB into ch 12.
Push for
1 sec.
MW
[F-2]
[PBT/M-ch/RIT] indicator
[PBT/M-ch/RIT] switch/[M-ch] (inner) control
[MENU/GRP]
[RIT] (outer) control
■ Memory programming
D Programming in VFO mode
Memory channel programming can be performed ei-
ther in VFO mode or in memory mode.
Menu group selection
Push [MENU/GRP] for 1 sec.
Selection from:
MM
,
SS
or
GG
(Graphic)
Menu selection (Example: M)
Push [MENU/GRP] momentarily.
Selection from:
MM
--
11
,
MM
--
22
or
MM
--
33
Either
Y or Z
Either
Y or Z