Operation Manual

107
8
MEMORY OPERATION
■ Frequency transferring
This is useful for transferring programmed contents to
VFO.
q Select
MM
--
22
.
w Push [F-4
VV//MM
] momentarily to select the VFO
mode.
e Push [F-1
MMEEMM
] to display the memory channel
contents.
•Memory channel contents appear above the multi-func-
tion key indicator.
r Push [PBT/M-ch/RIT] momentarily to select the M-
ch/RIT function, if the twin PBT is selected.
•[PBT/M-ch/RIT] indicator (Green) goes out.
t Select a memory channel with [M-ch].
•“ ” appears if the selected memory channel is a
blank channel (and does not have contents). In this
case transferring is not possible.
y Push and hold [F-4
VV//MM
] for 1 sec. to transfer the
frequency and operating mode.
•Transferred frequency and operating mode appear in
the display.
[EXAMPLE]: Transferring contents of memory 16.
Operating frequency
Contents of memory 16
Push for
1 sec.
V/M
: 21.320 MHz/USB (VFO)
: 14.020 MHz/CW
[MENU/GRP] [F-1]
[PBT/M-ch/RIT] indicator
[PBT/M-ch/RIT] switch/[M-ch] (inner) control
[F-4]
D Transferring in VFO mode
The frequency and operating mode in a memory chan-
nel can be transferred to the VFO.
Frequency transferring can be performed in either VFO
mode or memory mode.
Menu group selection
Push [MENU/GRP] for 1 sec.
Selection from:
MM
,
SS
or
GG
(Graphic)
Menu selection (Example: M)
Push [MENU/GRP] momentarily.
Selection from:
MM -- 11
,
MM -- 22
or
MM -- 33
Either
Y or Z
Either
Y or Z