Operation Manual

D Auto power OFF activity
119
12
CLOCK AND TIMERS
D Clock2 function activity
D Clock2 offset setting
q Entering time set mode, push [F-1
≤≤
] or [F-2
≥≥
] to
select “
CCLLOOCCKK22 FFuunnccttiioonn
” item.
w Select the CLOCK2 function activity using [DIAL].
e Push [
ZZ
( MENU / GRP )] twice to exit time set mode.
q Entering time set mode, push [F-1
≤≤
] or [F-2
≥≥
] to
select “
CCLLOOCCKK22 OOffffsseett
” item.
w Rotate [DIAL] to set the offset time within –24:00
to +24:00 in 5 min. steps.
e Push [
ZZ
( MENU / GRP )] twice to exit time set mode.
The transceiver can be set to automatically turn OFF
after a specified period is with beep when no opera-
tion is performed. The power-off period can be set to
30–120 min. in 30 min. steps.
q Entering time set mode, push [F-2
≥≥
] to select
“
AAuuttoo PPoowweerr OOFFFF
” item.
w Set the desired power-off time using [DIAL].
•“
PPuusshh [[SSEETT]]
” blinks.
e Push [F-3
SSEETT
] to enter the set time.
•Push [
ZZ
( MENU / GRP )] to cancel the setting.
r Push [
ZZ
( MENU / GRP )] twice to exit timer set mode.