Operation Manual

124
13
SET MODE
13
■ Display set mode
To adjust the LCD contrast or backlight, wait until
the LCD becomes stable (10 min. or more after turn-
ing power ON). This is an inherent characteristic of
LCDs and LCD backlights and does not indicate a
transceiver malfunction.
1
CCoonnttrraasstt ((LLCCDD))
This item adjusts the contrast of the LCD from 0% to
100% in 1% steps.
 40%
40% (default)
2
BBrriigghhtt ((LLCCDD))
This item adjusts the brightness of the LCD from 0%
to 100% in 1% steps.
 70%
70% (default)
3
LLCCDD UUnniitt BBrriigghhtt
This item adjusts the brightness of the LCD unit from
0% to 100% in 1% steps.
 40%
40% (default)
4
LLCCDD FFlliicckkeerr
This item adjusts the flicker of the LCD from 0% to
100% in 1% steps.
Icom recommends using the default value. But if
you find the LCD flicker objectionable, adjust this
item.
 65%
65% (default)
5
BBaacckklliigghhtt((SSwwiittcchheess))
This item adjusts the brightness of the switches from
0% to 100% in 1% steps.
 50%
50% (default)
6
DDiissppllaayy TTyyppee
This item sets the LCD screen type. There are 3 se-
lectable types: A (Black-background), B (White-back-
ground), and C (Blue-background).
AA
A-type LCD screen (default)