Operation Manual

129
13
SET MODE
7
RRFF//SSQQLL CCoonnttrrooll
The [RF/SQL] control can be set as the RF/squelch
control (default), the squelch control only (RF gain is
fixed at maximum) or ‘Auto’ (RF gain control in SSB,
CW and RTTY; squelch control in AM and FM).
See pgs. 1, 35 for details.
RRFF++SSQQLL
[RF/SQL] control as RF/squelch control
SSQQLL
[RF/SQL] control as squelch control
AAUUTTOO
[RF/SQL] control as RF gain control in SSB,
CW and RTTY; squelch control in AM and
FM (default)
■ Miscellaneous (others) set mode (continued)
8
QQuuiicckk SSPPLLIITT
When this item is set to ON, pushing and holding [F-1
SSPPLL
] (
MM -- 11
) for 1 sec. sets the undisplayed VFO fre-
quency to the displayed VFO frequency plus the split
offset and activates split operation.
See p. 90 for details.
OONN
Quick split ON
(default)
OOFFFF
Quick split OFF
10
SSPPLLIITT LLOOCCKK
When this item is ON, [DIAL] can be used to adjust
the transmit frequency while pushing and holding
[XFC] even while the lock function is activated.
See p. 89 for split frequency operation details.
OONN
Split lock function ON
OOFFFF
Split lock function OFF
(default)
9
SSPPLLIITT OOffffsseett
This item sets the offset (difference between transmit
and receive frequencies) for the quick split function.
The offset frequency can be set from –9.999 MHz to
+9.999 MHz in 1 kHz steps.
00..000000MMHHzz
0.000 MHz offset
(default)
--99..999999MMHHzz
Minus 9.999 MHz offset
12
DDUUPP OOffffsseett 5500MM
This item sets the offset (difference between transmit
and receive frequencies) for duplex operation. How-
ever, this setting is used to input the repeater offset
for the 50 MHz band only.
The offset frequency can be set from 0.000 MHz to
+9.999 MHz in 1 kHz steps.
00..550000MMHHzz
0.5 MHz offset (default)
11
DDUUPP OOffffsseett HHFF
This item sets the offset (difference between transmit
and receive frequencies) for duplex operation. How-
ever, this setting is used to input the repeater offset
for an HF band only.
The offset frequency can be set from 0.000 MHz to
+9.999 MHz in 1 kHz steps.
00..110000MMHHzz
0.1 MHz offset (default)