Operation Manual

131
13
SET MODE
20
VVSSEENNDD SSeelleecctt
This item select the [ACC] (pin 7) output.
OONN
VSEND is for the 144/430 MHz;
HSEND is for the HF/50 MHz. (default)
UUHHFF OOnnllyy
VSEND is for the 430 MHz;
HSEND is for the HF/50/144 MHz.
OOFFFF
VSEND is not used;
HSEND is for all bands.
■ Miscellaneous (others) set mode (continued)
19
[[TTUUNNEERR]] SSwwiittcchh
When an optional AT-180
ANTENNA TUNER is con-
nected, the transceiver retains the [TUNER/CALL]
key ON/OFF condition for each band, “Auto,” or all
band, “Manual.”
AAuuttoo
[TUNER/CALL] key ON/OFF condition is
retained for each band. (default)
MMaannuuaall
[TUNER/CALL] key ON/OFF condition is
retained for all band.
18
TTuunneerr ((PPTTTT SSttaarrtt))
When an optional AH-4 ANTENNA TUNER is connected,
tuning can be started automatically at the moment the
PTT is pushed.
This function activates for HF band only.
OONN
Tuning starts when pushing
[PTT] on a new frequency.
OOFFFF
Tuning starts only when
[TUNER] is pushed. (default)
22
SSPPEEEECCHH LLaanngguuaaggee
This item selects language for the speech function.
You can select between English and Japanese as the
SPEECH language.
EEnngglliisshh
English announcement
(default)
JJaappaanneessee
Japanese announcement
23
SSPPEEEECCHH SSppeeeedd
This item selects the speech speed between faster or
slower synthesizer output.
HHIIGGHH
Faster announcement
(default)
LLOOWW
Slower announcement
21
SSPPEEEECCHH LLeevveell
This item adjusts the volume level for speech function
from 0% to 100% in 1% steps.
 50%
50% (default)