Operation Manual

132
13
SET MODE
13
■ Miscellaneous (others) set mode (continued)
24
SSPPEEEECCHH SS--LLeevveell
You can have frequency, mode and signal level an-
nouncement. Signal level announcement can be de-
activated if desired.
When “OFF” is selected, the signal level is not an-
nounced.
OONN
Signal level announcement
(default)
OOFFFF
No signal level
announcement
25
SSPPEEEECCHH [[MMOODDEE]] SSwwiittcchh
This item selects the operating mode speech capabil-
ity when [MODE] is pushed.
When “ON” is selected, the selected operating mode
is announced at pushing [MODE].
OONN
Operating model announce-
ment with [MODE]
OOFFFF
No operating mode an-
nouncement with [MODE]
(default)
26
MMeemmooppaadd NNuummbbeerrss
This item sets the number of memo pad channels
available. 5 or 10 memo pads can be set.
55
5 memo pads
(default)
1100
10 memo pads
29
MMAAIINN DDIIAALL AAuuttoo TTSS
This item sets the auto tuning step function. When ro-
tating [DIAL] rapidly, the tuning step rate adapts as
selected.
There are 2 type of auto tuning steps: HIGH (Fastest)
and LOW (Faster).
HHIIGGHH
Auto tuning step is turned ON.
Fastest tuning step during rapid rotation
(default)
LLOOWW
Auto tuning step is turned ON.
Faster tuning step during rapid rotation
OOFFFF
Auto tuning step is turned OFF.
27
SSCCAANN SSppeeeedd
This item sets the rate at which channels or frequen-
cies are scanned during scan operations. High and
low can be selected.
HHIIGGHH
Scan is faster.
(default)
LLOOWW
Scan is slower.
28
SSCCAANN RReessuummee
This item sets the scan resume function ON and OFF.
OONN
Scan resumes 10 sec. after stopping on
a signal (or 2 sec. after a signal disap-
per). (default)
OOFFFF
Scan does not resume after stopping on
a signal. For the priority watch, setting to
OFF pauses the watch until the signal
disappears and scan resumes.