Operation Manual

49
4
RECEIVE AND TRANSMIT
This set mode is used to set the memory keyer repeat
time, dash weight, paddle specifications, keyer type,
etc.
•Setting the electronic keyer
q Select CW mode with [MODE].
w Select
SS
-- 11
.
e Push [F-2
KKEEYY
] then [
ZZ
(
MENU
/ GRP )] to select the
keyer root menu.
•If the keyer root menu appears, skip pushing
[
ZZ
(
MENU / GRP )]. The keyer starting menu can be
changed in the miscellaneous (others) set mode. (see
p.134)
r Push [F-4
SSEETT
] to enter the keyer set menu.
t Push [F-1
≤≤
] or [F-2
≥≥
] to select the desired set
item.
•Push and hold [F-4
DDEEFF
] for 1 sec. to select the de-
fault condition or value.
y Push [
ZZ
( MENU / GRP )] twice to exit the keyer set
menu and return to normal CW mode indication.
•Push and hold [MENU/GRP] for 1 sec. once or twice
to select the menu group
SS
.
•Push [MENU/GRP] momentarily one or more times to
select the menu
SS
-- 11
.
[MODE]
[MENU/GRP]
[F-1]
[F-2] [F-3] [F-4]
D Keyer set mode
1
KKeeyyeerr RReeppeeaatt TTiimmee
When sending CW using the repeat timer, this item
sets the time between transmission.
•1 to 60 sec. in 1 sec. steps can be selected.
•Push and hold [F-4
DDEEFF
] for 1 sec. to select a de-
fault setting. (default: 2 sec.)
2
DDoott//DDaasshh RRaattiioo
This item sets the dot/dash ratio.
•1:1:2.8 to 1:1:4.5 can be set.
•Check the ratio with side tone in CW mode.
•Push and hold [F-4
DDEEFF
] for 1 sec. to select a de-
fault ratio of 1:1:3.0.
Keying weight example: Morse code “K”
DASH
Weight setting:
1:1:3 (default)
Weight setting:
Adjusted
DASH
DOT (Fixed*)
Adjustable range SPACE (Fixed*)
*SPACE and DOT length can be adjusted with
“Key Speed” only in the quick set mode.