Operation Manual

66
4
RECEIVE AND TRANSMIT
4
D Storing a non standard repeater
q Turn the auto repeater function OFF in the miscel-
laneous (others) set mode. (p. 130)
w Push [MODE] to select FM mode.
e Select
MM -- 22
.
r Push [F-4
VV//MM
] to select VFO mode.
t Select
MM -- 11
, then push [F-2
AA//BB
] to select VFO A.
y Rotate [DIAL] to set the receive frequency (re-
peater output frequency).
u Push [F-2
AA//BB
] to select VFO B.
i Rotate [DIAL] to set the transmit frequency (re-
peater input frequency).
o Push [F-2
AA//BB
] to select VFO A.
!0 Push [F-1
SSPPLL
] to turn the split function ON.
•“ ” appears.
!1 Select
MM
-- 33
, then push [F-3
TTOONN
] to turn on the
previously set tone encoder ON. (p. 64)
!2 Rotate [M-ch] to select the desired memory chan-
nel.
•“ ” appears when the blank channel is selected.
!3 Select
MM -- 22
, then push and hold [F-2
MMWW
] for 1 sec.
to store the contents in the selected memory chan-
nel.
Rotate
Push
push
TON
SPL
push
MW
Set the frequency.
Selected M2, then
Selected M3, then
Set the frequency.
Appears
Appears
Select
Select
Select
•Push and hold [MENU/GRP] for 1 sec. once or twice
to select the menu group
MM
.
•Push [MENU/GRP] momentarily one or more times to
select the menu
MM
-- 22
.
[DIAL][MENU/GRP]
[F-1]
[F-2] [F-3] [F-4]