Operation Manual

68
4
RECEIVE AND TRANSMIT
4
DD
Programming a DTMF code
q Push [MODE] to select FM mode.
w Select
SS
-- 11
.
e Push [F-2
DDTTMM
] then [
ZZ
(
MENU
/ GRP )] to select the
DTMF root menu.
•If the DTMF root menu appears, skip pushing
[
ZZ
(
MENU
/ GRP )]. The DTMF starting menu can be
changed in the miscellaneous (others) set mode. (see
p. 134)
r Push [F-2
EEDDTT
] to enter the DTMF edit menu.
t Push [F-1
DD11
] — [F-4
DD44
] to select the desired
DTMF memory channel.
y Select the desired code by rotating [DIAL].
•Push [F-1
ÅÅ
] or [F-2
ÇÇ
] for cursor movement.
•Push [F-3
DDEELL
] to delete the selected code.
u Repeat steps t and y until the desired contents
are input.
i Push [
ZZ
(
MENU / GRP
)] to return to memory channel
selection mode, then select the next memory chan-
nel and repeat steps t and u for code input, if de-
sired.
o Push [
ZZ
(
MENU / GRP
)] twice to exit the keyer edit
mode.
DTMF memory channel select
Selected
code
[MENU/GRP]
[F-1]
[F-2] [F-3] [F-4] [DIAL]
•Push and hold [MENU/GRP] for 1 sec. once or twice
to select the menu group
SS
.
•Push [MENU/GRP] momentarily one or more times to
select the menu
SS
-- 11
.
The rate at which DTMF memories send individual
DTMF characters can be set to accommodate oper-
ating needs.
q Select the DTMF root menu as described above.
w Push [F-4
SSEETT
] to enter the DTMF set mode.
e Rotate [DIAL] to set the desired DTMF speed.
•Four rates are available: “100 ms” is the fastest; “500
ms” is slowest.
•Push and hold [F-4
DDEEFF
] for 1 sec. to select the de-
fault rate.
r Push [
ZZ
( MENU / GRP )] twice to exit the DTMF set
mode and return to the normal FM mode display.
D DTMF speed