Operation Manual

6
83
FUNCTIONS FOR TRANSMIT
D Adjusting the VOX function
■ VOX function
The VOX (Voice-Operated Transmission) function
switches between transmit and receive with your
voice. This function provides an opportunity for
hands-free operation or to input log entries into your
computer, etc., while operating.
q Select a phone mode (SSB, AM, FM) with [MODE].
w Select
MM
--
33
.
e Push [F-1
VVOOXX
] to toggle the VOX function ON
and OFF.
•“ ”appears while the VOX is in use.
The VOX gain, ANTI-VOX and VOX delay can be set in
VOX set mode.
[MENU/GRP] [F-1]
Appears
•Push and hold [MENU/GRP] for 1 sec. once or twice
to select the menu group
MM
.
•Push [MENU/GRP] momentarily one or more times to
select the menu
MM
-- 33
.
q Select a phone mode (SSB, AM, FM).
w Select
MM --
33
.
e Push and hold [F-1
VVOOXX
] for 1 sec. to enter the
VOX set mode.
r Select the VOX gain item using [F-1
≤≤
] or [F-2
≥≥
].
t While speaking into the microphone, rotate [DIAL]
to the point where the transceiver is continuously
transmitting.
y Adjust the VOX delay for a convenient interval be-
fore returning to receive.
-Select the VOX delay item using [F-1
≤≤
] or [F-2
≥≥
].
-Rotate [DIAL].
u If the receive audio from the speaker causes the
VOX circuit to switch to, adjust the anti-VOX set-
ting to the point where speaker audio does not ac-
tivate the VOX.
•Push and hold [MENU/GRP] for 1 sec. once or twice
to select the menu group
MM
.
•Push [MENU/GRP] momentarily one or more times to
select the menu
MM
-- 33
.
[MENU/GRP] [F-2] [DIAL][F-1]