Operation Manual

87
6
FUNCTIONS FOR TRANSMIT
The IC-7000 has a built-in, low distortion speech com-
pressor circuit. This circuit increases your average
talk power in SSB mode and is especially useful for
DX-ing or noisy condition when the receiving station
is having difficulty copying your signal.
q Select an SSB mode.
w Select
MM
-- 33
.
e Push [F-2
CCOOMM
] momentarily to turn the speech
compressor function ON and OFF.
•“” appears.
[MENU/GRP] [F-2]
Appears
•Push and hold [MENU/GRP] for 1 sec. once or twice
to select the menu group
MM
.
•Push [MENU/GRP] momentarily one or more times to
select the menu
MM
-- 33
.
■ Speech compressor
■ Monitor function
The monitor function allows you to monitor your trans-
mitted signals in any mode through the speaker. The
CW side tone functions regardless of the monitor
function setting.
q Push [AF( SET )] momentarily to enter the set mode
menu.
w Push [F-4
OOTTHH
] to enter the miscellaneous (oth-
ers) set mode.
e Push [F-1
≤≤
] several times to select “
MMoonniittoorr
.”
r Rotate [DIAL] to turn the monitor function ON.
•Push [F-4
DDEEFF
] for 1 sec. to return to default condition.
t Push [F-2
≥≥
] to select “
MMoonniittoorr LLeevveell
.”
y Rotate [DIAL] to adjust the monitor level.
•Push [F-4
DDEEFF
] for 1 sec. to return to default level.
u Push [
ZZ
( MENU
/ GRP )] twice to return to normal op-
erating mode.
Use headphones to prevent feedback.
[MENU/GRP] [DIAL]
[AF]
[F-4][F-1] [F-2]