Operation Manual

88
6
FUNCTIONS FOR TRANSMIT
6
CCOOMMPP LLeevveell
This item adjusts the speech compression level. The
speech compression level can be adjusted from 0 to
10.
•Push [F-4
DDEEFF
] for 1 sec. to return to default level.
5
5 (default)
D Compression level setting
•Pre-setting the transceiver
q Select an SSB mode.
w Turn the speech compressor function OFF, if it’s
ON.
●
● Select
MM -- 33
.
●
● Push [F-2
CCOOMM
] momentarily to turn the speech
compressor function OFF.
•“” disappears.
e Select ALC meter.
●
● Select
SS -- 11
.
●
● Push [F-3
MMEETT
] one or more times to select the
ALC meter.
•“ALC” appears.
r Adjust the MIC gain.
●
● Push [AF(
SET )] momentarily to enter the set
mode menu.
●
● Push [F-1
QQSS
] to enter the quick set mode.
●
● Push [F-1 Y] or [F-2 Z] to select “
MMIICC GGaaiinn
.”
●
● Push [PTT] (microphone) to transmit at your
normal voice level.
●
● While speaking into the microphone, rotate
[DIAL] so that the ALC meter reads within the
ALC zone, whether you speak softly or loudly.
●
● Push [Z( MENU / GRP )] twice to return normal op-
erating mode.
•Compression level setting
q Select COMP meter.
●
● Select
SS --
11
.
●
● Push [F-3
MMEETT
] one or more times to select the
COMP meter.
•“” appears.
w Turn ON the speech compressor function and
enter the speech compression level set mode.
●
● Select
MM -- 33
.
●
● Push and hold [F-2
CCOOMM
] for 1 sec. to enter the
speech compression level set mode.
•speech compressor function automatically turns ON.
e Rotate [DIAL] so that the COMP meter reads be-
tween 10 dB to 20 dB.
NOTE: When the ALC meter peaks exceed the
ALC zone, your transmitted voice may be distorted.
Adjust ‘COMP LEVEL’ so that the ALC meter
peaks within the ALC zone.
ALC zone
ALC
Appears
•Push and hold [MENU/GRP] for 1 sec. once or
twice to select the menu group
SS
.
•Push [MENU/GRP] momentarily one or more times
to select the menu
SS
-- 11
.
[DIAL][MENU/GRP] [F-2] [F-3]
•Push and hold [MENU/GRP] for 1 sec. once or
twice to select the menu group
MM
.
•Push [MENU/GRP] momentarily one or more times
to select the menu
MM
-- 33
.
[DIAL][MENU/GRP]
[AF]
[F-2] [F-3][F-1]