User's Manual

45
4
RECEIVE AND TRANSMIT
■ Repeater operation
A repeater amplifies received signals and re-transmits
them at a different frequency. When using a repeater,
the transmit frequency is shifted from the receive fre-
quency by an offset frequency. A repeater can be ac-
cessed using split frequency operation with the shift
frequency set to the repeater’s offset frequency.
q Set the offset frequency and turn ON the quick split
function in initial set mode in advance (pgs. 79, 80).
•If the quick split function is turned OFF, both transmit
and receive must be set separately.
w Push [MODE] one or more times to select FM
mode, then set the receive frequency.
e Select M1.
•Push [DISPLAY] once or twice to select M.
•Push [MENU] one or more times to select M1.
r Push [(F-1)SPL] for 1 sec. to activate the split fre-
quency function with the pre-selected offset.
t Select M4.
•Push [MENU] one or more times to select M4.
y Push [(F-2)TON] for 1 sec. to enter the FM tone set
mode.
•If FM mode has not been selected, this item does not
appear.
•Push [MENU] one or more times to select “T1 RPTR
TONE.”
•Rotate the main dial to set a subaudible tone frequency.
•Push [DISPLAY] to exit the FM tone set mode.
u Push [(F-2)TON] to turn the tone encoder.
•“T” appears.
i To check the repeater input frequency (direct sig-
nal from the other station), push and hold
[
(F-3)XFC] in the M1 display.
o To return to simplex operation, push [
(F-1)SPL] in
the M1 display.
Each memory channel can store a tone frequency
and an offset frequency, as well as the operating fre-
quency. Store repeater information into memory chan-
nels for quick and easy access to repeaters.
• Available subaudible tone frequencies
(Unit: Hz)
CH
VFO A
P O
S1
5
5379
20 40
10
60dB
FM T
SPL
M4 VOX TON
T1
RPTR TONE
Set the tone fre-
quency.
See below table
for available fre-
quencies.
FM
CH
VFO A
P O
S1
5
5379
20 40
10
60dB
FM
SPL
M1 SPL A/B XFC
24
QUICK SPLIT
Turn the quick
split function ON.
(Initial set mode
default is ON.)
[MODE] Main dial
[DISPLAY][MENU]
[F-2]
[F-3][F-1]
CONVENIENT
NOTE:
The split function may not be turned off
when you change the operating band, push
[(F-1)SPL] again to turn off the split function after
you finish the repeater operation.
67.0
69.3
71.9
74.4
77.0
79.7
82.5
085.4
088.5
091.5
094.8
097.4
100.0
103.5
107.2
110.9
114.8
118.8
123.0
127.3
131.8
136.5
141.3
146.2
151.4
156.7
159.8
162.2
165.5
167.9
171.3
173.8
177.3
179.9
183.5
186.2
189.9
192.8
196.6
199.5
203.5
206.5
210.7
218.1
225.7
229.1
233.6
241.8
250.3
254.1