User's Manual

ManualsBrandsIcom ManualsOtherIC-703

MEMORY OPERATION

■ Memory channels

The transceiver has 105 memory channels (includes 6

scan edge channels). Memory mode is useful for

quickly changing to often-used frequencies.

All 105 memory channels are tuneable which means

the programmed frequency can be tuned temporarily

with the main dial, etc., in memory mode.

q Select M2 functions.

• Push [DISPLAY] once or twice to select M.

• Push [MENU] one or more times to select M2.

w Push [(F-3)V/M] to select memory mode.

e Rotate [M-CH] to select the desired memory chan-

nel.

•All memory channels including blank channels can be

selected.

• [UP]/[DN] on the microphone changes the frequency.

r To return to VFO mode, push [(F-3)V/M] again.

VFO A

[EXAMPLE]: Selecting memory channel 17.

V/M

F-3

USB

MEMO

SPLIT

MEMO

USB

M-CH SHIFT

[DISPLAY][MENU][M-CH]

[F-3]

■ Memory channel selection

NOTE:

During split frequency operation, pro-

grammed memory contents can be called up to the

SUB readout (dot matrix portion of the display).

MEMORY

CHANNEL

MEMORY

CHANNEL

NUMBER

CAPABILITY

TRANSFER

TO VFO

OVER-

WRITING

CLEAR

Regular

(split memory)

1–99

Independent transmit and receive

frequencies and one mode in each

memory channel.

In addition, tone frequencies can

also be stored for repeater use.

Yes Yes Yes

Scan edges

1A–3B

(3 pairs)

One frequency and one mode in

each memory channel as scan

edges for programmed scan.

Yes Yes No