Operation Manual

1
PANEL DESCRIPTION
1-19
q SPCH/LOCK KEY [SPCH/LOCK]
SPEECH KEY Operation (p. 3-20)
Push to audibly announce the S-meter level, the
displayed frequency and the operating mode.
  •TheS-LevelannouncementcanbeturnedOFFinthe
“S-Level SPEECH” item of the “SPEECH” Set mode.
(p. 6-4)
SET
> SPEECH > S-Level SPEECH
  •WhenRITisON,theRIToffsetisnotincludedinthe
frequency announcement.
LOCK KEY Operation (AI sec. 5)
Hold down for 1 second to turn the Lock function
ON or OFF.
  •ThefunctionelectronicallylockstheDial.
  •
appears when the function is ON.
  •You can select the Dial lock and Panel lock in the
“Lock Function” item of the “Function” Set mode (p.
6-6).
SET
> Function > Lock Function
w PTT SWITCH [PTT] (p. 3-23)
Hold down to transmit, release to receive.
e UP/DOWN KEYS [Y]/[Z]
Change the operating frequency.
•Holddowntocontinuouslychangethefrequency.
•IftheQuicktuningiconisnotdisplayed,thetuningstep
is 50 Hz.
r TRANSMIT LED
Lights red while transmitting.
t KEYPAD
Pushing a key selects the operating band.
  •[(GENE)•] selects the general coverage band.
Pushing the same key 2 or 3 times calls up other
stacked frequencies in the band.
  •Icom’striplebandstackingregistermemorizes3fre-
quencies in each band.
After pushing [(F-INP)ENT], enter a numeric fre-
quency, then press [(F-INP)ENT] again.
  •Example: To enter 14.195 MHz, push [(F-INP)ENT]
[1] [4] [•] [1] [9] [5] [(F-INP)ENT].
y FILTER SELECTION KEY [FIL]
Push to select one of three IF filter settings.
  •Theselectedlterpassbandwidthandshiftingvalue
are displayed for 2 seconds in the window.
Push for 1 second to display the “FILTER” screen
to adjust the filter passband width.
When the “FILTER” screen is displayed, push for 1
second to return to the previous screen.
D HM-151 (Option)
SPCH
/LOCK
TUNER
/CALL
XFC
V/M
F-1
F-2
FIL
MODE
GENE
MW
123
456
789
.
0
CE
F-INP
ENT
1.83.5 7
10 14 18
21 24 28
50 144 430
q
e
r
t
y
w
Mic element