Operation Manual

3
BASIC OPERATION
3-24
Basic transmit operation (Continued)
Microphone gain adjustment D
(Mode: SSB/AM/FM/DV)
Push q
MIC/RF PWR
(C) to open the MIC gain/RF power
adjustment display.
Push [PTT] to transmit. w
 •Speakintothemicrophoneatyournormalvoicelevel.
Rotate [M-CH] e (L) to adjust the MIC gain.
When the MIC gain is adjusted too high, your
transmitted voice may be distorted.
Release [PTT] to receive. r
Push t
MENU
(C) to close the display.
❍ In the SSB mode:
Touch the TX meter to select the ALC meter. Then,
while speaking into the microphone, rotate [M-CH]
(L) so that the ALC meter reading stays within
the ALC zone.
❍ In the AM, FM and DV modes:
While speaking into the microphone, rotate
[M-CH]
(L) with another station listening to your
voice for clarity.
MIC/RF PWR
MENU
TX/RX LED
[M-CH]
MIC gain adjustment
ALC zone
When ALC meter
is selected.