Operation Manual

5
D-STAR OPERATION <BASIC>
5-11
Selecting the access repeater from the Near Re-2.
peater list
Push q
DR
(C) to select the DR mode.
Check whether or not “FROM” is selected. w
 •If“FROM”isnotselected,touchthe“FROM”eld.
Touch the “FROM” field. e
 •The“FROMSELECT”screenappears.
Touch “Near Repeater.” r
 •The“NEARREPEATER”screenappears.
 •Upto20ofthenearestrepeatersaredisplayed.
Touch the repeater as your access repeater, accord- t
ing to the distance from your position to the repeat-
er.
 •Example:“Hirano”
 •ThetransceiverreturnstotheDRmodescreen,andthe
selected repeater is set in “FROM.”
* When the position data accuracy level is
set to “Approximate,” the direction data
is not displayed if the distance to the re-
peater is under 5 kilometers. (AI sec. 9)
NOTE:
When using the Repeater Search function, be sure to
first receive your own position data.
•If no repeater is found in a 160 kilometers range,
screen 1, as shown to the right, will be displayed.
•Ifthelastreceivedpositioncanbeused,screen2,as
shown to the right, will be displayed.
Screen 1 Screen 2
Using the Repeater Search function (Continued) D
Shows the dis-
tance and direc-
tion from your
position to the
repeater*
Shows the call
sign of “Hirano.”
When your station is in Hira-
no-ku, Osaka-shi.
“Hirano” repeater is selected in
“FROM.”
“FROM” is
selected.
Touch
“FROM”
Touch “Near
Repeater”
Touch the
repeater
( Example:
Hirano)
“FROM” (Access repeater) setting
The L, R, C or D in the
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch screen)
L
eft
R
ight
C
enter
D
isplay