Operation Manual

5
D-STAR OPERATION <BASIC>
5-19
Directly inputting (UR) D
The destination station call sign can be directly input.
Example: Directly input the call sign “JM1ZLK.”
Push q
DR
(C) to select the DR mode.
Check whether or not “TO” is selected. w
 •If“TO”isnotselected,touchthe“TO”eld.
Touch the “TO” field. e
 •The“TOSELECT”screenappears.
Touch [ r Z] to display the next page.
Touch “Direct Input (UR).” t
 •The“DIRECTINPUT(UR)”screenappears.
Touch the desired block one or more times to y select
the desired character or symbol.
(Example: J)
 •AtoZ,0to9and/canbeselected.
 •Touch “AB⇔12” to toggle between the Alphabet input
and Number input mode.
 •Touch[CLR](D) to delete the selected character, symbol
or number.
 •Touch“ ” to input a space.
Touch [ u f](D) to move the cursor backwards, or
touch [g](D) to move the cursor forwards.
Repeat steps i y and u to program a call sign of
up to 8 characters, including spaces, and then touch
[ENT](D).
(Example: First, J, then M, then 1, then Z, then L,
then K.)
 •ThetransceiverreturnstotheDRmodescreen,and“JM-
1ZLK” is displayed in “TO.”
 •Afterprogramming,youcancorrect thecall signin the
DIRECT INPUT (UR) screen.
 •The programmedcall sign remainson the DIRECTIN-
PUT (UR) screen, until inputting a new call sign.
If the programmed call sign is duplicated in “Your Call
Sign” memory, the name is displayed. (Only when the
name has been programmed.)
Program a call
sign, and touch
[ENT].
“TO” (Destination) setting (Continued)
“JM1ZLK” is set in “TO.”
“TO” is selected.
Touch
“TO.”
Touch
[Z].
Touch
“ Direct Input
(UR)”
The L, R, C or D in the
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch screen)
L
eft
R
ight
C
enter
D
isplay