Operation Manual

3
BASIC OPERATION
3-3
Selecting the operating band
Do the following steps to change the operating band.
Also, the band stacking register provides 3 memories
for each band key to store frequencies and operating
modes. This function is convenient to quickly recall
previously operated frequencies and modes.
D Using the band stacking registers
Follow the steps below to enter a register on the
selected band. (Example: Memorizing 21 MHz)
1. Touch the MHz digits. (Example: 14)
• Opens the BAND STACKING REGISTER screen.
2. Touch a band key. (Example: [21])
• Displays a 21 MHz frequency.
TIP: Selecting a different Register
L Touching the band key for 1 second changes between
the 3 Registers.
LTouch
to return to the previous screen.
3. Set the frequency and the operating mode.
(Example: 21.30000 MHz in the USB mode)
4. Touch the MHz digits again.
L The frequency and operating mode set in step 3 is
memorized in the top Register.
5. By repeating the steps above, the Register that a
new frequency and operating mode are set in is
memorized.
Selecting the operating mode
You can select between the SSB, SSB data, CW, CW
reverse, RTTY, RTTY reverse, AM, AM data, FM and
FM data modes.
1. Touch the mode icon (example: USB).
Mode key Operating mode
[SSB] LSB USB
[CW] CW CW-R
[RTTY] RTTY RTTY-R
[AM] AM
[FM] FM
[DATA]
LSB LSB-D
USB USB-D
AM AM-D
FM FM-D
Selecting the Data mode
You can operate RTTY in the data mode using AFSK
(Audio Frequency Shift Keying). (p. 4-31)
L When a data mode is selected, you can mute the input
from the microphone. (p. 12-8)
MENU
» SET > Connectors > DATA MOD
(Example: selecting the USB-D mode)
1. While the USB mode is selected, touch the mode
icon.
• Opens the MODE screen.
2. Touch [DATA].
2. In the MODE screen, touch the desired mode key.
(Example: CW).
L In the SSB, AM or FM modes, the [DATA] key is
displayed.
MODE screen
• Operating mode selection list
LTouch mode key to select the operating mode
BAND STACKING REGISTER screen
MODE screen
• The USB-D mode is selected.